Radiologic Technologist Resume Example (2026)
By FindAJobAI team Updated How we built this page
Radiologic technologist postings ask for the same anchors: ARRT registration, state licensure, specific modalities and a record of safe, accurate imaging. What separates applicants is proof that their exams held up under review and that patients left the table calmer than they arrived. A rad tech resume should name the equipment, the exam volume and what a radiologist or supervisor noticed about your work.
The example below is a radiologic technologist with five years across a trauma center and an outpatient imaging clinic. Notice how each bullet names the modality, the situation and the result, instead of just listing duties like "performed X-rays."
Radiologic Technologist resume template
This example as a one-page template: one column, standard headings and plain text, the format applicant tracking systems read most reliably.
After you sign up, Create my CV builds your own resume in this same one-column layout, from your real experience.
Mid-level radiologic technologist resume example
A complete one-page example for a fictional radiologic technologist: every bullet pairs an action with what changed because of it.
Example resume · fictional person
Summary
Radiologic technologist with 5 years of experience in trauma and outpatient imaging, cross-trained in X-ray and CT. Averages 28 X-ray exams a shift with a reject rate under 2%, and helped cut average CT wait time by 9 minutes through better room turnover. ARRT registered in R and CT, with a steady hand for anxious and pediatric patients.
Experience
Radiologic Technologist II, Crescent Valley Medical Center
Tulsa, OK · Apr 2022 – Present
- Perform an average of 28 X-ray exams per 12-hour shift in a Level II trauma ED, keeping the repeat/reject rate under 2% against a department target of 5%.
- Cross-trained onto a 128-slice CT scanner and now cover 6 overnight shifts a month, cutting the need for on-call backup coverage.
- Reorganized the portable X-ray cart and pre-shift checklist, cutting average portable exam setup time from 9 to 5 minutes across 3 ICU units.
- Worked with 2 radiologists to standardize trauma chest and pelvis protocols, reducing requested repeat views by 15% over 6 months.
Radiologic Technologist, Willowbrook Outpatient Imaging
Broken Arrow, OK · Jul 2019 – Mar 2022
- Performed 20-25 diagnostic X-rays daily for a walk-in orthopedic and primary care clinic, keeping average patient time in the room under 11 minutes.
- Rebuilt the pediatric positioning routine with distraction techniques, cutting repeat exams on patients under 10 from 18% to 6%.
- Maintained HIPAA-compliant PACS records for over 12,000 studies a year and trained 3 new hires on positioning and shielding protocol.
Skills
- Modalities: General radiography (X-ray), CT, C-arm fluoroscopy, portable/mobile imaging
- Equipment: GE Revolution CT, Philips DigitalDiagnost, Carestream DRX, PACS, RIS
- Clinical: Patient positioning, radiation safety and ALARA, contrast administration, trauma protocols
- Compliance: HIPAA, Joint Commission imaging standards, radiation dose logging
Certifications
- ARRT Registered Technologist (R)(CT)
- Oklahoma State Radiologic Technologist License
- BLS Certified, American Heart Association
Education
- A.A.S. Radiologic Technology, Tulsa Community College, 2019
Fictional example by the FindAJobAI team: the person, employers and numbers are invented. Keep the structure; use your own work and numbers you can explain in an interview.
Entry-level radiologic technologist resume example
A new graduate with clinical rotations instead of paid experience. Education sits right under the summary, and the rotations are written like real shifts, each with a setting, a volume and something she caught or improved.
Entry-level example resume · fictional person
Summary
Entry-level radiologic technologist with an A.A.S. in Radiologic Technology and 1,200 clinical hours across ED, outpatient and surgical imaging. Comfortable with general radiography, portable exams and basic C-arm fluoroscopy. ARRT registered in R, looking for a first full-time technologist role in a hospital or outpatient setting.
Education
- A.A.S. Radiologic Technology, Wichita Area Technical College, 2026
Experience
Clinical Rotation – Emergency and Inpatient Imaging, Prairie Rose Regional Hospital
Wichita, KS · Jan 2026 – May 2026
- Performed an average of 10 supervised X-ray exams per shift in the ED, including portable chest and extremity imaging on 2 ICU units.
- Caught a mislabeled patient ID on a portable exam before it reached the radiologist, flagged per protocol and corrected within the shift.
- Assisted on 15 C-arm fluoroscopy procedures in the OR, handling positioning and sterile field awareness under a lead technologist.
Clinical Rotation – Outpatient Imaging, Sunflower Family Imaging Center
Wichita, KS · Aug 2025 – Dec 2025
- Performed 6-8 diagnostic X-rays daily for walk-in orthopedic patients under direct supervision, with a personal reject rate under 4%.
- Learned the center's pediatric positioning routine and successfully completed 20 pediatric exams without a repeat.
Skills
- Modalities: General radiography (X-ray), portable imaging, basic C-arm fluoroscopy
- Equipment: Siemens Multix, Carestream DRX, PACS (clinical exposure)
- Clinical: Patient positioning, radiation safety and ALARA, sterile field basics
Certifications
- ARRT Registered Technologist (R)
- BLS Certified, American Heart Association
Senior radiologic technologist resume example
A lead technologist ten years in, now responsible for scheduling, QA and training. The bullets move from performing exams to setting standards, cutting dose and mentoring the team, and the summary names the team size and the dose results.
Senior example resume · fictional person
Baxendale Oyelaran
Lead Radiologic Technologist
Omaha, NE · [email protected] · (402) 555-0184 · LinkedIn
Summary
Lead radiologic technologist with 10 years across trauma, outpatient and mobile imaging, now overseeing scheduling and QA for a 7-technologist X-ray and CT team. Led a dose-reduction project that cut average CT dose by 18%, and built the onboarding program that gets new hires to full trauma coverage in 6 weeks instead of 10.
Experience
Lead Radiologic Technologist, Meridian Trauma and Imaging Center
Omaha, NE · Feb 2021 – Present
- Lead scheduling and QA for a 7-technologist X-ray and CT team covering a Level I trauma ED, balancing 3 shifts a day across 24/7 coverage.
- Led a dose-reduction project adjusting CT protocols with the radiology director, cutting average effective dose by 18% across 900 monthly scans.
- Built a 6-week structured onboarding program for new technologists, replacing an unstructured 10-week shadow period and cutting first-year repeat rates by half.
- Audited 150 flagged exams a quarter for protocol adherence, reducing recurring positioning errors from 12 to 4 per quarter.
Senior Radiologic Technologist, Platte Valley Medical Center
Omaha, NE · Jun 2017 – Jan 2021
- Covered X-ray and CT across ED, inpatient and outpatient units, averaging 35 combined exams a shift during peak trauma hours.
- Trained 8 incoming technologists on trauma and portable protocols over 4 years, with all passing competency checks on first attempt.
- Co-wrote the department's updated pediatric dose protocol adopted across 2 satellite clinics.
Radiologic Technologist, Cornhusker Family Health Clinic
Lincoln, NE · Aug 2014 – May 2017
- Performed 18-22 outpatient X-ray exams daily for a multi-provider primary care clinic, maintaining a reject rate under 3%.
- Introduced a shielding checklist for pregnant patients, adopted clinic-wide after a compliance review.
Skills
- Modalities: X-ray, CT, portable imaging, C-arm fluoroscopy
- Equipment: GE Revolution CT, Siemens Multix, Carestream DRX, PACS, RIS
- Leadership: Scheduling, QA audits, dose protocol design, onboarding and training
Certifications
- ARRT Registered Technologist (R)(CT)
- Nebraska State Radiologic Technologist License
- BLS Certified, American Heart Association
Education
- A.A.S. Radiologic Technology, Metropolitan Community College, 2014
How to write a radiologic technologist resume
Five steps, in the order a recruiter reads the page. The format around them stays plain for every job: one column, standard headings, newest role first.
Header: name, target title and links
Use the title “Radiologic Technologist” even if your badge said X-Ray Tech, and list your ARRT letters and state license near your name. These are the first things an imaging manager scans for.
Summary: what you do and your best proof
Name your modalities, your typical setting (trauma, outpatient, mobile) and one measurable habit: your reject rate or exam volume. Skip lines like “dedicated healthcare professional”; they say nothing about what you can scan.
Experience: newest first, a result in every bullet
Open each bullet with the exam type and setting, then the volume or technique, then the result: a repeat rate, a time saved or a protocol change. Listing duties like “positioned patients” says less than giving the number behind it.
Skills: grouped, in the ad's words
Group by modality, equipment and compliance. Name the scanner brand and model where you can; departments often standardize on one vendor and will ask about it in the interview.
Education and certifications
List your degree, your ARRT registration with modality letters, and your state license if required. If you're newly licensed, list clinical rotations like jobs, each with a setting, a volume and one thing you caught or improved.
Skills to put on a radiologic technologist resume
Hard skills are the tools and methods of the job; soft skills are how you work with people. Each comes with one way to prove it, because a skill named only in a list counts for little. Add the ones you really have.
Hard skills
- General radiography (X-ray)
- Give your average exam volume per shift and your repeat/reject rate together.
- CT
- Name the scanner (slice count, brand) and a protocol or dose detail you worked with.
- Portable/mobile imaging
- Say how many units or beds you cover and one setup improvement you made.
- C-arm fluoroscopy
- Name the procedure type you supported and your role in positioning or sterile field.
- Radiation safety (ALARA)
- Point to a dose check, shielding habit or protocol deviation you caught.
- Patient positioning
- Tie a positioning technique to a drop in repeat exams, with a before and after.
- PACS/RIS
- Mention the system by name and the study volume you managed in it.
- Contrast administration
- Note your certification status and the exam type you administer it for.
- Trauma protocols
- Give the trauma level of your facility and a protocol you helped standardize.
- Pediatric imaging
- Describe a technique you use and its effect on repeat rate for young patients.
- QA and dose logging
- Give the exam count you audit and what the audits caught or changed.
- HIPAA compliance
- Mention the record volume you handle and any training you've given on it.
Soft skills
- Calm under pressure
- Describe a trauma or code situation and how your imaging held up under time pressure.
- Patient communication
- Give an example of calming an anxious or pediatric patient that avoided a repeat exam.
- Attention to detail
- Mention a labeling or positioning error you caught before it reached a radiologist.
- Teamwork
- Name the roles you coordinate with during a trauma case, such as nursing or the ED physician.
- Adaptability
- Describe switching between modalities or units within a single shift.
- Mentoring
- Count the new hires or students you've trained and a result of that training.
- Time management
- Give your average time per exam or room turnover and what kept it steady under volume.
Radiologic Technologist resume bullet examples: weak vs strong
The same work, written two ways. The strong version names the tool, the scope and a result; the numbers are examples, yours must be real.
Weak: Performed X-rays on patients.
Strong: Performed an average of 28 X-ray exams per shift in a Level II trauma ED, holding the repeat/reject rate under 2% against a 5% department target.
Shows volume, setting and a quality metric together.
Weak: Operated CT scanner.
Strong: Cross-trained onto a 128-slice CT scanner and now cover 6 overnight shifts a month without needing on-call backup.
Equipment named, with the staffing impact it created.
Weak: Worked well with patients.
Strong: Redesigned pediatric positioning using distraction methods, lowering repeat exams for patients under 10 from 18% to 6%.
Turns a soft claim into a measurable outcome.
Weak: Followed radiation safety procedures.
Strong: Logged and reviewed dose on 400+ monthly exams, flagging 3 protocol deviations that led to an updated shielding checklist.
Safety habit shown through a specific catch and its result.
Weak: Good at positioning patients.
Strong: Worked with 2 radiologists to standardize trauma chest and pelvis protocols, cutting requested repeat views by 15% over 6 months.
Names collaborators and a before-and-after figure.
Weak: Maintained equipment.
Strong: Reorganized the portable X-ray cart and pre-shift checklist, cutting average portable setup time from 9 to 5 minutes across 3 ICU units.
Concrete process change with a time saved and scope.
15 more radiologic technologist resume bullet examples
Grouped by area of the job, so you can find the ones closest to your work. Keep the shape (action, scope, result) and replace the invented numbers with your own.
Exam volume and quality
- Performed 30+ X-ray exams per shift in a Level I trauma ED while holding the repeat/reject rate at 1.8%.
- Reduced average room turnover time from 14 to 9 minutes by pre-staging contrast and positioning aids before each shift.
- Completed 500+ outpatient CT exams a year with zero recordable incident reports.
- Cut average wait time for walk-in X-ray patients from 22 to 13 minutes by adjusting the daily scheduling template.
Safety and compliance
- Logged dose on 450 monthly CT exams and flagged 5 cases exceeding the department's reference range for review.
- Updated the pregnancy-screening and shielding checklist, closing a gap found in a Joint Commission mock survey.
- Caught 3 wrong-side exam orders before imaging by cross-checking the requisition against the patient, preventing repeat radiation exposure.
- Completed annual radiation safety recertification 2 months early for 4 consecutive years.
Equipment and workflow
- Migrated 2 X-ray rooms from film-based to PACS-based workflow, cutting image retrieval time from minutes to seconds.
- Wrote the troubleshooting guide for a recurring CT scanner calibration issue, cutting unplanned downtime from 3 hours to 45 minutes per incident.
- Standardized the portable X-ray cart layout across 3 nursing units, cutting setup time by 4 minutes per exam.
Training and teamwork
- Trained 6 nursing staff on proper patient positioning assistance for portable exams, reducing retake requests by 20%.
- Mentored 4 radiography students through clinical rotations, with all passing their ARRT boards on the first attempt.
- Coordinated with 3 ED physicians to prioritize trauma imaging orders during high-volume overnight shifts, keeping average turnaround under 15 minutes.
- Led monthly case reviews with 5 fellow technologists to discuss repeat exams and positioning improvements.
Radiologic Technologist resume summary examples
Two or three lines on what you do and your strongest proof. Start from the one closest to your level and use your own facts.
Recently licensed radiologic technologist with an A.A.S. in Radiologic Technology and clinical rotations in ED and outpatient imaging. Comfortable with general radiography and portable exams, with early exposure to CT during a 12-week clinical placement. ARRT registered in R.
Radiologic technologist with 5 years in trauma and outpatient imaging, cross-trained in X-ray and CT. Averages 28 X-ray exams a shift with a reject rate under 2%, and helped standardize trauma protocols that cut repeat views by 15%.
Lead radiologic technologist with 10 years of experience across trauma, outpatient and mobile imaging. Oversees scheduling and QA for a 7-technologist X-ray and CT team, and led the dose-reduction project that cut average CT dose by 18% department-wide.
Common radiologic technologist resume mistakes
Each one is easy to make and quick to fix before you apply.
Listing modalities without exam volume
“X-ray, CT” in Skills says what you've touched, not how much. Add a volume or frequency to at least one bullet per modality.
Burying ARRT and license info in Education
Hiring managers filter on registration and license first. Put ARRT letters and state license near the top, in the header area or summary.
No mention of reject or repeat rate
A reject/repeat rate is one of the clearest quality signals in this field. Include it at least once if you track it.
Unclear descriptions of patient care
“Great with patients” is unverifiable. Replace it with a technique and its effect, like a pediatric approach that cut repeat exams.
Treating clinical rotations as unimportant
For new grads, rotations are your experience. Write them with settings, volumes and outcomes, not just a list of departments visited.
ATS tips for a radiologic technologist resume
Applicant tracking systems turn your file into text that recruiters search, mostly for the skills and titles in the ad. They rarely reject a resume on their own; one that parses badly or misses the ad's words just doesn't come up.
- List your ARRT registration and modality letters (R, CT, MR) exactly as the ad asks; many ATS filters search for them verbatim.
- Name the equipment brand and model you've used (GE, Philips, Siemens); departments often standardize on one vendor.
- Show exam volume and reject/repeat rate together; a high volume with a low reject rate reads stronger than volume alone.
- Mention trauma, pediatric or portable experience by name if the posting lists that setting.
- State your state license and BLS status clearly; these are usually hard requirements, not preferences.
For the format itself, run the free ATS resume checklist.
Everything for Radiologic Technologists
- Radiologic Technologist cover letter examplesThree example letters and a short email version
- Radiologic Technologist interview questions30 questions with sample answers
- Radiologic Technologist job descriptionDuties, skills and requirements
- How to tailor your resume without lying
Other resume examples
Radiologic Technologist resume FAQ
What certifications should a radiologic technologist resume list?
ARRT registration with your modality letters (R, CT, MR, etc.), your state license if your state requires one, and BLS certification. List them near the top, not buried in Skills.
How do I show patient care skills on a rad tech resume?
Tie them to an outcome: a positioning technique that cut repeat exams, a communication approach that calmed anxious or pediatric patients, or a setup change that reduced wait time.
Should I list every modality I've touched?
List modalities you can work independently in and name the equipment. If you only observed a modality during clinicals, say so rather than implying full competency.
How we built this page
The FindAJobAI team wrote the three example resumes, the bullets, the skills and the advice for radiologic technologist roles. The people, employers and numbers in the examples are invented; the structure, the tools and the way each bullet is built are the parts to copy.
Once we track enough live radiologic technologist job ads, this page also shows the skills they ask for most, counted the same way as our in-demand skills report.
Last reviewed on November 1, 2026.